27
HANDLING THE MACHINE IN ITS PACKAGING
The machine is delivered packed on a pallet. The weight and dimensions are provided in the Technical Data.
The forks of the lift-truck or pallet trolley must be positioned so that the centre of the machine is halfway
between them.
The pack must be hadled with great care, avoiding knocks. Do not lift it unnecessarily or to excessive hei-
ghts. Packs may not be stacked.
UNPACKING THE MACHINE
Unpacking the machine carefully and gently and the brackets on the wheels must be removed. The machine
must now be brought to ground level using a metal or wooden ramp.
HANDLING THE MACHINE AFTER UNPACKING
After unpacking, check the machine and fi t the batteries, if not already installed. If the machine has to be
transported short distances after use, disconnect the battery wires and remove the brushes and squeegee
blade. Before transporting it over long distances, the machine should be returned to its original pallet.
The machine can be pushed short distances.
Summary of Contents for JUMBO 1002 RN
