Instruction Manual
Innovative DisplayWorks
RCM-77
8
9
CLEANING
•
Unplug the cooler prior to cleaning.
•
Unplug the cooler at the electrical outlet; never pull the service cord.
•
Do not use sharp or pointed objects for cleaning.
•
Do not spray water directly onto cooler, and do not use hard or steel brushes to clean the cooler.
•
Clean the inside cabinet of the cooler with a clean, damp cloth or with mild soap.
•
Avoid damaging the cooler by using only non-abrasive cleaning products. Do not use organic solvents, boiling water,
washing powder or acid while cleaning.
If the cooler is unused for a long period of time, unplug the electrical cord, follow cleaning instructions, and open or remove the lid.
MOVING THE COOLER
•
Remove all product from the unit.
•
Secure all loose parts inside the cooler.
•
Tape the door shut.
•
Ship the cooler in an upright position.
REFRIGERATION
•
The RCM-77 Electric Impulse Cooler utilizes R134a refrigerant.
SPECIFICATIONS
Model:
RCM-77 Electric Impulse Cooler
Power Supply (V/Hz):
220-240V/50Hz
Dimension (Diameter x H):
22-1/4” x 33-1/4”
Box Dimension (Diameter x H):
23” x 34”
Troubleshooting
The following are NOT malfunctions:
Situation
Causes
Liquid fl owing noise within cooler
• This is the sound of the cooling agent fl owing through the pipes.
Refrigeration system is shutdown for longer periods
of time while temperature inside is still very low
• This refrigerator is well insulated and can maintain a relatively ambient
temperature.
Condensation on glass door
• This may be due to a high indoor humidity or the coolers temperature is set too
low. Wipe the door dry with a towel.
Prior to calling service, check the following:.
Issues
Solutions
Cooler is not working properly
Please check power supply:
• Check the electrical outlet for power, and that the plug is properly inserted.
• Check to see if the circuit breaker is tripped or the fuse is blown.
• Check if the condenser is free of dirt and debris.
• Check for low voltage
Cooler is not keeping product cool
• Provide ample space between all products to ensure proper circulation of air.
• Keep unit away from direct sunlight or other heating source.
• Keep the door closed as often as possible.
• Be certain the cooler is not touching external objects or walls.
Excessive noise
• Be certain the cooler is placed on a level surface.
• Be certain the cooler is not touching external objects or walls.
Compressor turns on and off frequently
• The room temperature is higher than normal.
• The door is not closed completely.
• The door gasket is not sealed properly.
• There is insuffi cient clearance around the cooler.
• The thermostat is not set properly.
• The frequency of cycling will be reduced when all of the product reaches the set
temperature.
After Sales Service
Information to provide to your qualifi ed service professional:
• Serial number from the interior wall of the cooler;
• Coolersʼ installation address and contact information;
• Installation location hours and operation;
• Nature of problem;
• Any reports of power interruptions;
• Recent service or maintenance completed on the cooler;
• Has the cooler been relocated from original installation location;
• Clear access to the cooler;
• Coolersʼ instruction manual.
