~8214842.doc
- 15 -
When this occurs, replace the existing batteries with two (2) new AA Alkaline batteries to restore normal
operation to the remote. If your remote still does not operate, you may want to check to see if one of the buttons
is stuck in its “down” position.
3. If you have a TV that’s operated by remote control, it is recommended that you plug it directly into a wall
outlet instead of the cable set-top terminal.
4. If you have any questions concerning the brand, model or operation of your cable set-top terminal, contact
your cable operator.
Frequently Used Terms
AUDIO Devices - Audio receivers, amplifiers, CD players that you can program your remote to operate.
DVR - Digital Video Recorder.
Default Setting – How your remote is set when you receive it from your cable operator.
Electronic Components / Devices - The various electronics device the remote is designed to operate. These
include cable set-top terminals, TVs, VCRs, DVDs, audio-video receivers, amplifiers and CD players.
Fast-Rotation - The power / mode buttons will illuminate in a fast-rotation (i.e. CBL
à
TV
à
VCR
à
DVD
à
AUDIO
à
CBL…) repeated every 1/3 second. Fast-rotation occurs when the remote is receiving keypresses to program it
to your electronic devices.
IPG – Interactive Program Guide
Mode - The device the remote is set to operate (ex. Cable, TV, VCR, DVD, Audio)
OSD – On Screen Display
PIP – Picture-in-picture functionality through your Cable set-top terminal.
Program (Setup) – The process of teaching your remote control to operate your electronic devices.
Slow-Rotation - The power / mode buttons illuminate in a slow-rotation (i.e. CBL
à
TV
à
VCR
à
DVD
à
AUDIO
à
CBL…) repeated every 1 second. Slow-rotation occurs when the remote is in the programming mode, waiting
for the next entry on the keypad of the remote.
TV Output Channel - The channel your TV needs to be set on for proper Cable reception (most often TV channel 3,
but may be TV channel 2 or 4). If you have any questions concerning your TV output channel, contact your cable
operator. Or, with your cable set-top terminal turned on, try setting your TV to channel 2, 3 or 4 to obtain a clear
picture.
Transport Functions - These are the [STOP], [PLAY], [FWD], [REW], [PAUSE] and [REC] buttons. In the remote
control's Cable mode, these buttons operate your Cable set-top features. In the remote control's VIDEO mode,
these operate your VCR or DVD functions.
VIDEO Devices - VCR or DVD players.
Device Setup Codes
If you find that the setup codes listed above do not operate your devices, it is possible your remote was
manufactured before the revision date printed on this Instruction Manual. If this occurs, contact your cable operator
and request a newer version of your remote control.
Rev. 06/07
© 2007, Contec Holdings, LLC
U.S. Patents 7,109,908 & 6,507,306 & D491,925
Point and Press
®
, Memory Guard
®
, SmartKey
®
and Synergy
®
are registered trademarks of Contec Corporation
Explorer
®
is a registered tradem ark of Scientific-Atlanta, Inc.
Voyager
®
is a registered trademark of Pioneer Digital Technologies, Inc.
Passport
®
is a trademark of Pioneer Digital technologies, Inc.
