6
FRONT PANEL
TU-110B
3. A/PS BUTTON (AME/PSCAN)
Preset memory scan auto score memory button.
• When A/PS button is pressed for less than 1 sec. it
performs preset memory scan function.
• When A/PS button is pressed for more than 1 sec. it
performs auto store memory function.
1) Preset memory scan function descriptions
Reading preset memory in regular frequency for 5 se
-
conds each.
Ex1) Current receiving frequency: FM1, CH3.
- If A/PS button is pressed aging during preset me
-
mory scan operation, it stop preset memory scan
operation and maintain the current frequency.
2) Auto store memory function descriptions
During SEEK UP operation with station detection, if
any station is detected, then this detected station is
automatically stored to the corresponding preset me-
mory area in regular frequency.
– Current receiving frequency is preset memory:
From current channel to M6
– Current receiving frequency is not preset memory
: From M1 to M6.
– During auto store memory, output signals are mu-
ted and flashing channel number (1Hz 1/2 duty) till
finished this function.
– When this operation is finished, it performs preset
memory scan operation for one time.
4. STEREO/MONO BUTTON
MONO function control button. It is valid only in FM band.
„STEREO“ display is toggled on LCD panel.
5. MUTE BUTTON
MUTE on/off control button. When „MUTE“ is displayed
on LCD panel, all outputs are muted.
