EPSILON ES2,ES4
25
It has 2 panels:
Panel "Passport information" displays information about the factory settings and
configurations of the product.
• The panel "Complex Information" displays the data received from the measuring head at
present time and the data received from the calibration protocol saved before.
This tab is interesting as for beginning of calibration and for calibrated sensor as well. In the first
case, the user can check the availability and conformity of the product. In the second case, after
loading of calibration data, with the help of a button “Load calibration data”
you can analyze the efficiency of the product in real terms. If you
download calibration data you will be able to estimate the fuel level not only in the level code or
in capacity code, but also in quantitative units of measurement, in liters. Pressing the button
“Show the diagram”
you’ll open a window where you can see and edit the
diagram and the calibration table. The process for editing will be described below, in the chapter
about window “Monitoring of fuel tank calibration”.
Percentage value is calculated:
• if there is a protocol attached to the application – from the maximum value recorded in the
protocol;
• in there is no before saved protocol – from the maximum possible value.
