声明:本说明书著作权归杭州睿登科技有限公司所有,未经允许任何单位或个人不得用于商业用途。
18
⑥
switch power supply test:
check the wring again and power on the switch power supply, and use test
pencil to check the power and insulation status. Then use multimeter to check if the
60V output is normal, then use screw driver to adjust the output of the switch power
supply to about 68V.
⑦
RD6012 assembly
:
install RD6012 on the front side, if it is not fixed well, you can
gently bent the buckle
⑧
Connect the rest cables: insert the external temperature sensor cable and take it
out from the hole on the bottom, insert the green terminal and sort out the cables.