www.rdlnet.com
•
•
•
www.rdlez.com
•
•
•
•
•
•
•
Produces Consistent Levels from Any Microphone
Installs Between Microphone and Mixer/Amplifier
Improves Intelligibility with Fast Automatic Level Control
Controls Overloads that Cause Distortion and Clipping
Front-Panel Set-Up Trimmer with LED Indicator
Automatic Phantom Voltage Switching with LED
XLR Input and Output
EZ-MCP1
Microphone Compressor
TYPICAL APPLICATION
The EZ-MCP1 is an in-line microphone compressor that produces consistent audio levels despite wide variations (up to 30 dB)
from the microphone. It is installed between a dynamic or condenser microphone and a mic-level mixer or amplifier input.
The only setup required is a front-panel level trimmer that is adjusted during normal speech until the compression LED just
begins to flash. A rear-panel output level trimmer is provided although it is typically left in the normal default position. Phantom
voltage (24 V) is automatically switched on when the EZ-MCP1 output is connected to a mic jack that provides phantom voltage.
The EZ-MCP1 improves sound quality and intelligibility by producing consistent audio levels and controlling overloads that
produce distortion and clipping. It is used for recording, paging and public address in houses of worship, restaurants, clubs,
meeting rooms, educational facilities, conference rooms and commercial sound systems.
EZ-MCP1
Microphone
Power Amp
www.rdlnet.com
•
•
•
www.rdlez.com
