POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock
Rotate 1/4-turn
counter-clockwise
to unlock
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
24 VDC POWER INPUT
Insert plug from power
supply. Rotate 1/4 turn
clockwise to lock.
PHANTOM
The PHANTOM LED glows
when 24 V phantom is
being provided to the
microphone connected to
the MIC INPUT. (Phantom
is automatically turned on
when the MIC OUTPUT
is connected to other
equipment that provides
phantom voltage.
LEVEL ADJUSTMENT
Speak into the microphone at the
lowest
normal
speech level. Adjust the LEVEL control until the
COMPRESSION LED just begins to flash.
MIC INPUT
Plug a microphone into the jack. The microphone may be
either a standard dynamic or a condenser microphone.
OUTPUT LEVEL
Set to the NORMAL position. Increase or decrease the
level only if necessary.
Maximum overload protection is achieved if the OUTPUT
LEVEL control is set to NORMAL and the proper system
mic level is adjusted on the system mixer or amplifier. The
OUTPUT LEVEL adjustment is normally used if access to
the system mixer or amplifier is unavailable. Note: The
mic input of the system mixer or amplifier
may
overload if
the OUTPUT LEVEL is turned up too high.
MIC OUTPUT
Connect to the microphone input
of other equipment, typically a
mixer or amplifier.
POWER INDICATOR
Glows blue when the
product is connected to a
valid power source.
POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock
Rotate 1/4-turn
counter-clockwise
to unlock
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
