EC7000i and EC7500i User Guide
Setting up the EC7000i or EC7500i
Connect the power cord
1. Insert the round end of the power cord into the power port on the back of the scanner. Align the
flat side of the power connector facing up.
2. Plug the power cord into an electrical power outlet.
3. When you connect to power, the LED lights up. Your unit is now powered on.
CAUTION:
Disconnecting the power source while the scanner is processing a transaction may cause
data files stored in the unit’s memory to be lost.
NOTE:
The power adapter includes a locking mechanism that securely connects the power cord to the
scanner. To prevent cord damage, do not pull on the cord. Firmly slide back the locking mechanism on
the connector before disconnecting the power cord from the unit.
Drivers and software
The drivers for your scanner are installed on your computer when you install the check scanning
application. There are many applications that support EC7000i and EC7500i scanners; most are available
from third-party vendors.
If you are not sure where to acquire your check scanning application, check with whoever provided your
scanner.
Install the receipt printer paper roll
If your scanner includes a receipt printer, use single-ply, thermal-sensitive paper. These rolls are 2.25
inches (5.8 cm) wide and can be purchased from office supply stores.
CAUTION:
•
Handle thermal paper with care; friction, humidity, light, etc, will damage it.
•
The scanner will not load paper into the printer if the end of the roll is wrinkled, folded, or torn. Cut
the end of the paper straight across before trying to load it into the scanner.
To install a roll of paper:
1. Ensure that the scanner is powered on.
2. Open the top of the paper roll cover at the back of the unit.
3. Hold the paper roll with the paper feeding from the bottom and guide the end of the paper into the
slot that enters the scanner. The feed mechanism will pull the paper into the unit.
4. Place the roll into the paper roll holder.
5. Close the paper roll cover.
©2014 RDM Corporation
Page 14
