EC9100i and EC9600i Series Scanner User Guide
Maintaining your scanner
©2016 RDM Corporation
Page 29
4.
Pull the inkjet cartridge out of the scanner.
5.
To insert the new inkjet cartridge, pull the inkjet latch back and place the inkjet cartridge into
the holder. The cartridge needs to be at an angle so that the back of the cartridge is lower than
the front of the cartridge.
6.
Push the cartridge down into the holder until the cartridge snaps into place.
Once installed, the inkjet cartridge sits on a slight angle with the back of the cartridge lower
than the front.
7.
Make sure there is no gap between the inkjet cartridge and the endorsement channel.
8.
Replace the endorsement printer cover.
Replacing the inkjet blotter
Scanners with endorsement printers include an inkjet blotter that absorbs excess ink from the
endorsement process. Over time, the blotter might stop absorbing ink effectively and so should be
replaced. Scanners with endorsement printers come with five replacement blotters.
To replace the inkjet blotter:
1.
Disconnect the power.
