background image

3

SAFETY WARNINGS

Read this manual carefully before installation and/or use of 

the equipment and keep it in an accessible place.

The Manufacturer’s Technical Dept. is available at the 

numbers indicated on the back cover of this manual, for 

consultancy or particular technical requests.

• 

 CAUTION

Installation and maintenance must only be performed by

qualified staff; if this is not the case the warranty will 

become null and void

 

• Only  use  original  spare  parts:  failure  to  comply  with  this 

norm can make the warranty null and void.

WARNINGS

DISPOSAL

In accordance with the provisions of the following 

European directives 2011/65/EU, 2012/19/EU and 

2003/108/EC, regarding reducing the use of 

hazardous substances in electrical and electronic 

equipment, in addition to waste disposal.

The symbol of the crossed-out wheely bin as shown on the 

product indicates that at the end of its useful life it must be 

disposed of separately from other waste.

The user must therefore dispose of the above equipment at the 

end of its useful life at an appropriate centre for the collection 

of electronic and electro-technical waste, or return it to the 

dealer when purchasing a similar new device in terms of one 

to one. Proper waste collection leading to the subsequent 

recycling, treatment and environmentally friendly disposal of 

the equipment helps to avoid possible negative effects on the 

environment and on health and promotes the recycling of the 

materials of which the equipment is made up.

Illegal disposal of the product by the user will lead to the 

application of penalties prescribed by current legislation in 

force.

Summary of Contents for EASY CLIMA





















Reviews: