RDZ EASY CLIMA, User Manual

8

00

••••

59

00

••••

23

01

••••

31

01

••••

12

00

••••

99

HOME

USER SET-POINT

This chapter describes the screenshots that can be accessed by a 

short press

 of the 

 key.

set

 appears on the DISPLAY. Use the 

 and 

 keys to scroll the items in the menu.

Use the 

 key to confirm the selection and access the value of the item selected.

Use the 

 and 

 keys to adjust the value within the pre-defined fields. 

Use the 

 key to confirm the new value introduced.

Use the 

 key, go back to the upper level until reaching the main display.

N.B. on the basis of the type of data, the temperature symbol 

 or humidity symbol 

 switches on, or no symbol 

switches on (if it is a constant for example).

First level 

Second level  Description of the third level screenshot

1

set

1

S_Hc

Comfort temperature set in winter mode

2

S_hr

Economy temperature set in winter mode

3

S_cc

Comfort temperature set in summer mode

4

S_cr

Economy temperature set in summer mode

5

S_um

Humidity set

2

cf

1

mode

Setting the ON or OFF operating mode to control the LT Area and the HT Area. 

The VALUE field means “ON” or “OFF”. If “OFF” is set, the main display will show “OFF”.

3

time

1

te00

Setting TIME BAND or NORMAL operation. The VALUE field means “ON” or “OFF”.
If “ON” is set, the symbol switches on 

4

hour

1

ore

Display of the operating hours of the LT Area Pump, the timer is shown on the DISPLAY

up to a maximum of 9999 hours.

2

rst

RESET procedure: “OFF” is shown, which can be switched to “ON” using the 

 key.At this 

point, pressing the 

 key confirms the decision to reset the timer and then goes back 

to “rst”.

5

all

Display of alarm codes in progress. 

See relevant paragraph.

ATTENTION: The set-point value will follow the trend of the room only in the presence of the Easy Clima Controller 

installed. If this is not the case, the set-point set can affect the system flow temperature.

The humidity set-point will have no function if there is no humidity probe installed in the room.

DATE-TIME MODIFICATION PROCEDURE