Turn the handles on each foot counter-clockwise until the foot is a few inches off the ground. You
may need to rotate the jam nut clockwise to lower it closer to the foot.
1
Repeat this process for the leveling foot on the other side
Note:
There is one other leveling foot at the back of the Forge/Station, but it is already raised.
2
With the help of another individual, remove your Forge/Station from its crate.
TWO PEOPLE REQUIRED:
The Forge/Station is heavy and requires two people
to lower it down the ramp and onto your floor.
IMPORTANT:
Do not pull on the arm or READY pendant to remove the Forge/Station from its crate.
11
© 2020 COPYRIGHT READY Robotics ALL RIGHTS RESERVED
