Pressing the
[+]
button scrolls
UP
Pressing the
[-]
button scrolls
DOWN
Pressing the
[OK]
button moves to the
NEXT
selection
Pressing
[+]
&
[-]
at the same time
EXITS
the menu
A U T O S E T P R O G R A M M I N G
AUTOSET PROGRAMMING FOR QUICK SETUP MENU
The Franklin Autoswing comes “out of the box” with preprogrammed
defaults that allow the unit to function with just a small amount of initial
setup programming.
1. Press the [OK] button once
• The display will read “LANG” (language) followed by “ITA” (Italian)
• Scroll down using the minus [-] button until you see “ENG” (English)
displayed
• Then press the [OK] button
2. The word “TYPE” will be displayed briefly
• Press the minus [-] button until “IGEA” is displayed
• Then press [OK]
3. The next screen will display “N. MOT” (Number of Motors)
• Scroll down with the minus [-] button until “2” is displayed
• Press [OK]
NOTE:
if only installing one motor, choose “1” then press OK
4. “DR” (Direction) will now be displayed for a moment followed by “INT”
(interior)
• Select “INT” and press [OK]
5. Next “PRESET” will be displayed, followed immediately by “AR” (Auto
-
matic Residential)
• Scroll down to “SR” (Semi-Automatic Residential). This allows the
doors to work like a typical garage door
• Press [OK]
12
A
UT
O
SET
PR
OGRAMMING
