PRE-USE INSTRUCTIONS
Prior to each fire table operation, check the hose and valve for evidence of excessive
abrasion or wear.
CHECKING FOR LEAKS
Ma
Make a leak check solution by mixing 1 part dishwashing
soap with 3 parts water in a spray bottle.
ke sure control knob is OFF. Then, turn LP gas tank
to ON at valve.
Spray leak solution on valve connections paying particular
attention to the areas indicated by arrows.
If any bubbles appear turn LP gas tank OFF, reconnect and
re-test. If you continue to see bubbles after
several attempts, disconnect LP gas source and
contact Real Flame at 1-800-654-1704 for assistance.
If no bubbles appear after one minute turn tank OFF, wipe
away solution and proceed.
Check for leaks at these locations.
WARNING Before using this fire table, make sure you have read, understand and are
following all information provided in the important Safety Information section of this manual.
Failure to follow those instructions can cause death, serious injury or property damage.
!
