ChokeWarning_D.pdf 1 6/2/16 11:00 AM
Really Good Book Exhibit Stand
™
Assembly Instructions
Helping Teachers Make A Difference
®
© 2010 Really Good Stuff
®
1-800-366-1920 reallygoodstuff.com Made in China #158414
Congratulations on your purchase of this
Really Good Book Exhibit Stand
™
.
Adult assembly required.
This Really Good Stuff
®
product includes:
1
Parts
To assemble this Really Good Book Exhibit Stand
™
:
1. Attach the wire stand to back wire frame by
inserting the 2 open ends of the stand into the
circular washer holes located on each side of the
back wire frame. You will have to use a little force.
2. Insert 2 hooks into the top of the corresponding
hex nut holes located on each side of the wire
frame. Stand frame up to line the holes in the
hooks up with corresponding holes in back wire
frame.
Note: Hooks are side specific. Each hook has a flat
side that will face outward. The indented side will
face in and touch the wire frame when secured to
it with a nut and bolt.
3. Secure hooks to the back wire frame using 1 nut
and 1 bolt per hook. Place the bolt into the hole in
the hook and through the hole in the frame. Hand
tighten the nut onto the bolt.
Note: Phillips head screwdriver may be helpful for assembly.
1 Magnetic strip
1 Front wire frame
1 Back wire frame
1 Wire stand
4 Hooks
4 Nuts and bolts
2
3
Magnetic
strip
Front wire frame
Back wire frame
Wire stand
Bolts Nuts
Hooks
Rev.3 07/19
