生活美好,臂不可少
http://www.realman-robotics.com
30
Fig. 7-1 Robot power socket.
7.2 Power On
Connect the power cable to the power socket.
Check that the controller power switch is in the closed status when it is not
connected.
Ensure that the robot does not bump into nearby people or equipment.
Make sure the power cable is connected to a 24V DC power supply.
Press the power button. After the power indicate light turns blue, and wait for
about 25s. When the controller buzzer sound stops, the initialization of the
controller system of the robot is completed.
Fig. 7-2 Robot power button.
7.3 Power Off
Power socket
Power button