RealMan (Beijing) Intelligent Technology Co., Ltd.
13
and feasible level. This document is used to communicate any residual risks of the robot
prior to installation to the integrator and users. If the integrator's risk assessment
indicates that there are risks in its particular application that may pose an unacceptable
risk to users, the integrator must take appropriate risk mitigation measures to eliminate
or minimize these risks until the risk is reduced to an acceptable level. It is not safe to
use until appropriate risk mitigation measures, if needed, have been taken.
If the robot is installed uncooperatively (e.g., when using hazardous tools), the risk
assessment may infer that the integrator needs to connect additional safety devices (e.g.,
safe start devices) to ensure the safety of personnel and equipment while it is
programmed.
2. Transportation and Precautions
When the robot is hoisted, proper measures and positioning should be taken for the
moving parts, so as not to cause accidental movement and damage during hoisting and
transportation. Before transportation, the packing shall be carried out in accordance
with the packing standard, and the required marks shall be marked on the outside of the
packing cases.
During transportation, the robot needs to be fastened and kept in a fixed position.
When unpackaging the to the installation position, hold the robot until all bolts on the
base of the robot are fastened.
There is no brake installed inside the robot Joint5~7. Before power off, please keep the
robot in the proper position to prevent the joint from rotating and colliding under the
gravity. (When the robot arm is vertical, place the robot arm in the origin position before
power off.)
Keep the original packaging after transportation and store the packaging box in a dry
