RealMan (Beijing) Intelligent Technology Co., Ltd.
30
2. It is recommended that the user use base surface with large heat dissipation, such as
all-aluminum material. When the operating environment exceeds 35°C, it is strongly
recommended that the user use material with large heat dissipation.
Ensure that the robot arm is properly and safely installed in place.
If the robot is submerged in water for a certain period of time, it may be damaged.
Robots should not be installed in water or wet conditions unless they are declared to
have IP67 protection rating.
Tipping hazard: if the robot is not securely positioned on a solid surface, the robot may
tip over and cause damage.
6.5 The End Tool Installation
The dimensions of tool flanges are shown in Fig. 6-4.
Fig. 6-4 The dimensions of the tool end.
1. Make sure tools are properly and securely installed in place.
2. Ensure the safety of the installed structure so that no parts will accidentally fall and
cause damage.
7. Robot Power-On and Power-Off
7.1 Before Power On
