Battery charging
The reader is powered by
its own
Lithium / ion battery. This is provided so as to allow for thousands of readings. It is charged when connected to
the
V8
Mobile reader via a USB port.
On the left side of the reader is a red "LED" light, which indicates that charging. This turns to green when charging is
complete.
The lifespan of the battery depends on its use but also the environment in which the reader is stored. The
“time out” is around 30s.
To replace the battery, you need to open the compartment underneath the reader. It is imperative that you only use original batteries. (Please check with
your supplier).
Software for mobile phone “Android”
This software is provided free of charge . You can download connecting to :
This software allow to read a “chip” FDXB, FDXA, HDX, to register in the memory of the phone the date, hour, place and also photos.
Of course it is possible to send thes
e information to a data base, to a PC or the “Cloud”.
If you need a specific application , please consult your distributor.
PS: the GPS position datas depends of the quality of your network. It is quicker if you are connected using WIFI.
Characteristics
In compliance with ISO 14223 and 11784/85 standards
Dimensions: H 17.3cm, W 8.3cm, T 2.7 cm
Fixing the phone to the V8 Mobile: Velcro or transparent strap
Weight: 160g
Power: 3.7V 1400mA rechargeable battery Comes with USB / micro USB
Reader for FDXB, FDXA HDX and EM4102 chips Storage temperature: -10 ° +55 °
Reading distance glasstag 2 x 12mm 10cm FDXA Operating temperature: -5 ° to +40 °
Reading distance glasstag 2 x 12mm 14 to 16cm FDXB (Above 35° reading distance may decrease).
Reading distance "electronic earpiece" 29/31cm
Certificates
EC and FCC
Warranty
One-year
manufacturer’s warranty
Designed in France and made in China
Velcro
