Getting Started
Installing the AA Batteries
Your radio uses 3 AA Alkaline batteries.
1.
With the back of the radio facing you, lift the battery latch up to
release the battery cover and remove the cover.
2.
Insert 3 AA Alkaline batteries as shown on the inside of the
battery compartment.
3.
Reposition the battery cover and press down to secure.
Note:
The RT210 model radio can use a NiMH rechargeable
battery instead of 3 AA Alkaline batteries.
Installing the NiMH Battery Pack
1.
Follow step 1 above to remove the battery cover.
2.
Remove the battery pack from the clear plastic bag.
Do not disassemble or unwrap the battery pack.
3.
Insert the NiMH battery pack so the metal contacts on the side of
the battery are facing outward from the radio to connect with the
contacts on the battery door.
4.
Reposition the battery cover and press down to secure.
12
Getting Started
Getting Started
Realtree 10-01-04.qxd 10/1/04 12:14 PM Page 14