You
MUST
follow these instructions prior to installation
Ratchet Strap Instructions
Model: RTLS-310
15’ Ladderstand
6
To release tension, push
spring loaded retaining lock
and simultaneously pull
on strap.
2
Pull Strap through
opening.
3
Insert end of strap
through slot in ratchet
wheel.
Ratchet handle back
and forth to tighten
strap.
4
5
After strap is tight,
close handle to
the locked position.
Open ratchet handle
flat and insert end of
strap through opening.
1
Detailed Ratchet Strap Instructions
Distributed by Acheson Harriman Swan, LLC, 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
Place looped end of Ratchet
under platform
1
Insert Ratchet through loop
2
Pull to tighten
3
1
2
3
Place looped end of strap
under platform
4
Insert strap through loop
5
Pull to tighten
6
4
5
6
YOU
MUST
READ AND FOLLOW
ALL
INSTRUCTIONS PRIOR TO INSTALLATION
www.primalvantage.com/realtree
©2021 (rev. 1/21)