A
L
40
60
Insert Bottom Ladder
Section into sleeved end
of Middle Ladder Section .
Isert 1 - M6 Quickclip into
each sleeve.
Attach the Ratchet Straps on either side
of the top rear Tree Connection Brace
on the rear of the Platform Frames
(as shown above).
(See Ratchet Strap
Instructions for correct weaving).
Attach Installation Straps on either side
of the lower rear foot platform assembly (as
shown above).
(See Installation Strap
Instructions for correct weaving).
40
A
V
V
B
B
B
V
C
A
C
13
14
15
X
Insert straight end of Ladder
Section
into sleeved end
of Ladder Section
. Insert
1 - M6 Quickclip
V
through
the hole on the sleeve and
through the ladder sections
on each side of the ladder.
Close the quickclips to
secure the ladder sections
together.
Slide Top Ladder Section
A
into Yokes
L
and insert
1-M6x40mm Bolt
in each
side to secure. Make sure the
sleeves are pointing towards
the ground.
12
12
13
14
15
W A R N I N G
Rear View
Assembly Instructions Page 6
W
W
G
G
W
H
X
Model: RTLS-503
15 Ft. Two-man Ladderstand
Customer Service Department 1-866-972-6168
NOTE
The Stabilizer Sleeve on Ladder section B
MUST be facing towards the tree.
MAKE SURE ALL BOLTS ARE TIGHT
BEFORE PROCEEDING TO INSTALLATION
www.primalvantage.com/realtree
X
Distributed by Acheson Harriman Swan, LLC, 2407 W. Euclid Ave., Littleton, CO 80120
©2021 (rev. 1/21)
