You
MUST
follow these instructions prior to installation
Ratchet handle
back and forth to
tighten strap.
Place looped end of Ratchet
under platform.
1
Place looped end of strap
under platform.
4
Insert strap through loop.
5
Insert Ratchet through loop.
2
Pull to tighten.
3
Pull to tighten.
6
1
4
5
6
2
3
2
3
4
5
6
Open ratchet handle
flat and insert end of
strap through opening.
Pull Strap through
opening.
Insert end of strap
through slot in
ratchet wheel.
To release tension, push
spring loaded retaining lock
and simultaneously pull
on strap.
After strap is tight,
close handle to
the locked position.
Ratchet Strap Instructions
1
Model: RTLS-503
15 Ft. Two-man Ladderstand
Customer Service Department 1-866-972-6168
Detailed Ratchet Strap Instructions
www.primalvantage.com/realtree
Distributed by Acheson Harriman Swan, LLC, 2407 W. Euclid Ave., Littleton, CO 80120
©2021 (rev. 1/21)
