RealWear Navigator 500™ User Guide
Page 18 of 148
Version 1.1
1.2.1.8
Microphone Array
There are two sets of two microphones on RealWear Navigator. The Primary Microphones
handle user input, while the reference microphones cancel external noise. The front
microphones, active by default, are located on the display pod. The rear microphones are
located on the side of the device opposite from the boom arm. These are used when issuing
voice commands while the boom arm is out of your field of view.
Microphones
1.2.1.9
Speakers
A 94dBA loudspeaker is located above each ear.
Speakers (on both sides)
Active by default
Active for voice commands