RealWear Navigator 500™ User Guide
Page 31 of 148
Version 1.1
3.1.2
Attach Head-Mounting Accessories
The following accessories can be used with RealWear Navigator, followed by attachment
instructions, as required:
•
Workband
•
Hardhat with clips
•
Protective eyewear
•
Baseball cap
•
Tri strap
3.1.2.1
Attach the Workband
To attach and position the Workband, do the following:
1. Place the Workband on your head and adjust the Velcro strap to a comfortable fit.
2. Push the Workband clips into the slots on each side of RealWear Navigator.
Attach the Workband
3. After the Workband is attached to RealWear Navigator, position it on your head.
4. Roughly level the device with ground.
5. Position the Workband horizontally across your forehead.
Note: For an optimal experience, it is recommended that the display is close to the center
line of your face, in front of and close to your eye.