Rear view safety RVS-091407, Product Manual

12

Pairing  &  Connecting                                                            

Operation  Guide                                             

Pairing is not necessary as the unit has already been paired. If you 
are not able to connect the camera, please try to pair the camera 
by the following steps:
1. Press “Pair” button on the Wireless Digital Transmitter. You will 
see the LED Blinking in RED/BLUE. The unit will
remain in Pair mode for 30 seconds
2. Go to the monitor and do the following step:
a. Press “Menu”
b. Go to “Pair Camera”
d. The unit is now in pair mode - if the unit was able to search and 
connect with the camera, the
display will show “Pair OK”. If no camera is found, then the display 
will show “Timed Out”.

1. Power ON/OFF
• The Dash or Mirror Monitor will automatically turn ON when it is 
connected to a power source, and the camera is recieving power.
2. Connection
• Rearview image will be automatically appear on the screen 
during reverse and will remain in standby
when the vehicle is in any other gear or driving forward.”