Reverse With Confidence
™
19
BA
SIC
SET
TINGS
Scale function will only work with gridlines. Choose “ON/OFF.”
Default is “ON.”
Choose “ON/OFF.” Default is “ON.”
Save basic settings. Choose “ON/OFF.” Default is “OFF.”
Volume adjustments range from 0 to 100. The default is 80.
Scale Adjustment
Start Logo On/Off
Preset Menu
Volume Adjustment
Chapter Four: Menu Se
ƫ
ng
4.1 Remote control
4.2 Menu se
ƫ
ng guidance
Enter picture menu
Guide line clockwise
Menu parameter decrease
Menu parameter increase
Guide line up
Guide line le
Ō
Guide line an
Ɵ
-clockwise
Guide line right
Guide line down
The menu only can be set by remote control, and kindly check its de
ni
Ɵ
on as below.
Enter guide line adjustment
Press to reset all
menu and parameters
Short press “MENU”to enter “PICTURE”, then you can switch among “BRIGHTNESS”,
“COLOR”, “CONTRAST”, “SCALE”, “START LOGO”, “PRESET”, or enter out. When it switches to
“PRESET”, re-press shortly the MENU, and you would close the menu. UP and DOWN are to
change the
gure of each se
ƫ
ng.
12
4.2.1 BRIGHTNESS ADJUSTMENT
The defaulted se
ƫ
ng is 50, ranging from 0 to 100, and only CVBS signal can work.
11
4.2.2 COLOR ADJUSTMENT
The defaulted se
ƫ
ng is 50, ranging from 0 to 100, and only CVBS signal can work.
4.2.3 CONTRAST ADJUSTMENT
The defaulted se
ƫ
ng is 50, ranging from 0 to 100, and only CVBS signal
can work.
It's only for the model with guide lines, and no such se
ƫ
ng for those without such func
Ɵ
on.
ON is defaulted se
ƫ
ng, and you can manually set it to OFF.
4.2.4 SCALE ADJUSTMENT