11
Using CoreReLation Phase Analyzer (continued)
Following is a technique using a single instance of CoreReLation Phase Analyzer to visually analyze with great
accuracy the phase and stereo image of individual mix/sub-group channels or the master bus channel.
Device Connections
1. Add a Spider Audio Merger & Splitter
below Reason’s Master Section.
2.
Connect the Master Section’s Control Room output to the Spider Audio Merger left and right input 1.
3.
Connect the Master Section’s FX Send 8 output to the Spider Audio Merger left and right input 2.
4. Connect the Spider Audio Merger
output to CORE’s left and right audio inputs.
Mixer Settings
5. In the Master Inserts FX Return section, turn down the FX Return Level to 0 dB.
6.
In the Mixer’s Fader section, turn down the Control Room Level to 0 dB.
7. At this point you can turn on the FX Send 8 on single or multiple mix/sub-group channels to analyze the
audio signal and stereo imaging with CORE. To analyze the master bus only, turn off the FX Send 8 on
all mix/sub-group channels and turn up the Control Room output dB level (keeping in mind that this is not
affecting the overall volume of your master mix bus.). See image on 12 for this setup.
