6
CORE front panel overview (continued)
Following are descriptions of CoreReLation Phase Analyzer
’s front panel sections and controls.
9. LSR (Left - Stereo - Right) Monitor Toggle Switch
The LSR Monitor Toggle Switch allows you to monitor the incoming audio signal in 3 modes, as follows:
L mode
You'll hear only the left channel
source signal, as a centered
mono signal.
S mode
Sound source is a left and right
channel signal in stereo or
mono, depending on signal.
R mode
You'll hear only the right
channel source signal, as a
centered mono signal.
Notes:
In S mode the Global Width Knob must be set to 100.0% for full stereo.
When the LSR Toggle Switch is set to either L or R, these modes convert the Global Width Knob
into a HAAS effect to widen an otherwise mono signal. See point 13 on page 7 for more details.
10. Right Gain Knob
The Right Gain Knob independently controls the gain of the right input channel signal. By default it is set
to 0.0dB
12 o’clock position (unity gain), -24.0dB to the right position and +24.0dB to the right position.
[Ctrl]-click (Win) or [Cmd]-click (Mac) to return to the default 0.0dB
12 o’clock position (unity gain).
11. Right Pan Knob
The Right Pan Knob independently controls the
Right/right pan position of the right input channel signal.
By default it is set to 100.0% right position. [Ctrl]-click (Win) or [Cmd]-click (Mac) to reset to the default
100.0% right position.
