S E T U P M E N U O P T I O N S
34
Recommended Audio Format Options
Depending on your specific audio/video connection method, the
Audio
options of the UBR-X100 / X110 / X200 may
need to be adjusted to match your configuration. Refer to the video and audio connection methods described
previously in this guide and the following audio setup guidelines.
Audio Connection Directly to TV
If the player is connected directly to the TV through HDMI, it is recommended that you use the following audio format
options :
o
Secondary Audio :
On
o
HDMI Audio Format : PCM
o
S/PDIF Output :
(any – not used)
Multi-Channel Digital Audio to Receiver through HDMI
If the player is connected to an A/V receiver or processor with HDMI inputs, you can send all current audio formats to
your receiver in pure digital form. To get the best possible audio via HDMI, you may need to set the following options
on the player’s
HDMI
menu :
•
If your receiver supports HDMI v1.3 with decoding capability for high resolution lossless audio formats
such as Dolby TrueHD and DTS-HD Master Audio, please use the following audio output setup options
:
o
Secondary Audio :
Off
(or
On
if you need secondary audio)
o
HDMI Audio Format :
Bitstream
o
S/PDIF Output :
(any – not used)
•
If your receiver supports HDMI v1.1/1.2 Multi-Channel PCM audio, but not high resolution lossless
audio formats such as Dolby TrueHD and DTS-HD Master Audio, please use the following audio
output setup options :
o
Secondary Audio :
Off
(or
On
if you need secondary audio)
o
HDMI Audio Format : PCM
o
S/PDIF Output :
(any – not used)
Multi-Channel Analogue Audio to Receiver (UBR-X200)
If the player is connected to an A/V receiver through the 7.1ch or 5.1ch analogue audio jacks using 8 or 6 RCA
cables, you can play all supported audio formats and listen to them with your A/V receiver and surround sound
systems. The following audio output setup options are recommended :
o
Secondary Audio :
Off
(or
On
if you need secondary
audio)
o
HDMI Audio Format : Off
o
S/PDIF Output :
(any – not used)
Also set the
Speaker Configuration
in the
Audio
menu :
•
Set
to
7.1Ch
or
5.1Ch
.
•
Enable or select the multi-channel analogue inputs on your receiver.
Summary of Contents for UBR-X100
Page 51: ...48 WWW REAVON COM ...
