44
“No Disc” or
“Unknown Disc”
error
No disc or incompatible disc
loaded in player
Eject disc and check.
Dirty disc recording surface
Eject the disc and clean any dirt or fingerprints.
Disc not properly loaded
Eject disc and make sure the label side is facing up
and the record side is facing down.
Condensation on the laser
pick-up head
Turn on the player, eject the disc and leave the player
on for about an hour.
Remote control
failure
Remote control is out of range Use the remote control within the effective range.
Low battery
Replace the batteries
Temporary function
failure
Scratched or damaged disc is
used
Replace the disc.
Some functions are not
available during playback
Stop playback completely, then try again.
Interference from other
devices
Identify interference by turning off other devices, and
then relocate or replace the offending device
Some Setup Menu
items are grayed
out
Some setup options cannot be
changed while a disc is
playing. Some setup options
may be mutually exclusive with
other setup options.
Fully stop playback, eject the disc and try the Setup
Menu again.
“Connection Test”
fails
No internet connection.
Verify that your router has a connection to the internet.
Try power cycling the modem and router. Try a direct
Ethernet connection if possible.
“Network” shows no
server
No network connection. Media
server not properly configured.
Connected to wrong network.
Verify that other network features are functional on the
device. If the network issues are isolated to the
“Network” feature, consult your media server’s
documentation to ensure proper configuration.
Summary of Contents for UBR-X100
Page 51: ...48 WWW REAVON COM ...
