34
MOTOmed viva2 / viva2 light / viva2 Parkinson /
gracile12 leg trainer
Preparation
If possible, place the MOTOmed with the large tube facing a wall
.
Sit in a wheelchair or in a stable chair in
front of the MOTOmed within a suitable
distance to the device – the legs need to
move freely but the knee joints must not be
stretched out completely at any time
2
while training.
Make sure the wheelchair or chair is secured to avoid tilting or slipping.
Foot insertion and securing aid (if needed)
Press the long button
7
»insertion aid« (
) when the MOTOmed
is in stand-by mode (black screen and constant green light.
By »pushing and holding« the buttons
6
»pedals forward« or
5
»pedals backward« you can move the foot shells
2
(fig. 22) to the
lower position for convenient leg insertion, one after the other.
Now fasten your feet and legs with the hook and loop straps or the
self-operating foot holders (item no. 506.000 bzw. 598.000)
.
Height adjustment MOTOmed gracile12
Adjust the height of the motor shaft for smaller children or in order to
change the movement range of your hip
joint (hip angle)
. Hold the horizontal
arm
and loosen the thumb screw
5
.
Pull the snap button
6
and adjust the
MOTOmed gracile12 to the suitable height
. Retighten the thumb screw
5
.
fig. 22
page 30
fig. 23
5
6
TRAINING PREARRANGEMENTS
