39
TRAINING PREARRANGEMENTS
Do not pull out each side more than 15 cm / 5.9 in. No pullout
stop provided!
With the accessory
expandable chassis (item no.160.000)
you can
do this adjustment without tools.
Positioning of the MOTOmed letto2:
The MOTOmed letto2 should be
positioned in such a distance to the bed that the foot shells are above
the shin bones of the user. The motor drum should be positioned
centric to bed and user.
High stability through ground fixation:
The ground fixation can be
locked by pushing the red part of the
foot pedal
5
. This ensures high
stability, even during active training. In
order to loosen the ground fixation
please push the green part of the foot
pedal
6
.
Adjustment of the training height:
The height of the foot shells
should be adjusted in a way that in the lowest possible position these
do not touch the mattress. Then refasten the fixation screw of the
height adjustment
1
.
During training, you mustn't use the hydraulic or manual height
adjustment of the bed unit.
Knee bending adjustment:
Before inserting the legs
7
loosen both
wing screws of the longitudinal
adjustment and move the crank
2
toward the user or away from him
7
. After that, retighten the wing
screws.
5
6
fig. 30
page 38
2
7
fig. 31
4
