ADDITIONAL FEATURES
CLEANSING
RECKE
MULTICOOKER
MC-X160
The removable inner bowl, supplied with the set, is easy to use and clean. The ceramic coating
prevents food from sticking to the bottom of the bowl and if for any reason, some residue remains, the
"
Cleansing
" program allows you to remove the remains from the cooking bowl's surface without any
harm to the upper coating of the bowl, thereby prolonging its life.
By default, the cooking time is 30 minutes, but it is possible to manually adjust the range of
cooking time from 5 minutes to 1 hour by 5-minute increments.
The
“Auto-heat”
mode in this program is unavailable.
To launch the program:
Fill the cooking bowl with a sufficient amount of water to cover the residue. For hard-to-remove
excess, you can add some dish detergent.
To activate this program, repeatedly press the
“Menu”
button until the
“Cleansing”
program
is displayed with light on the display.
Once the “
Cleansing
” program is selected, it is possible to activate the “
Timer
” mode (for
reference, see the
“Delayed start”
section).
Once this program is selected, the cleaning time can be adjusted as necessary (for information,
refer to the
“Setting the cooking time”
section).
Press and hold the
“Start”
button for several seconds to launch the program. The countdown
timer will appear on the display.
In order to stop the cooking process, discard the program, or reset the settings, press the
“Cancel”
button.
1.
2.
3.
4.
5.
6.
35