Remove the valve from the outside of the lid by putting your finger in the hole on the outside of the lid
and pulling the steam valve towards yourself.
The steam valve consists of two parts. It is important to first disassemble the steam valve in order to
wash it thoroughly. To do this, simply turn the lower round part of the steam valve counterclockwise so
that the marker lines up with the sign and remove from the top cap. Rinse both parts thoroughly
and set them to dry.
Place the lower round part of the steam valve into the hole on the inner part of the steam valve and turn
clockwise until the marker
once again lines up with the sign . Make sure that the steam valve
is properly assembled and fixed.
Install the steam valve back into its original place (the hole on the outside of the lid) and press down
gently to secure it in position.
RECKE
MULTICOOKER
MC-X160
Each time you cook, condensation occurs and it gets collected in the condensation reservoir on
the body of the appliance. The reservoir must be cleaned after each use.
Before first use, and to remove odors after each cooking, we recommend boiling half a lemon for
15
minutes
using the
“Steam”
program.
36