18
CONFIGURATION
1. Launch your web browser and enter the IP address of 192.168.10.1.
2. Click the “SETTINGS” button on the screen.
3. Enter admin username and password to login (default: username: admin; pass-
word: admin123) as shown/ in Figure 11.
4. Click the “Settings” button located on the top right corner.
5. The RecoMedia setting page shall appear as figure below .
6. Perform either the Display or WiFi configuration:
Change the WiFi AP settings such as the frequency band, channel num-
ber, SSID name and encryption mode.
Change the Resolution of the display device connected to the RecoMedia
wireless media box
It is strongly recommended to select a less congested WiFi channel.
CONFIGURATION