background image

©2011 ReconRobotics 

11  

 

 

Safety Information & Warnings 

Safety Information & Warnings 

 

 

Read these warnings before charging or using your Recon 
Scout Robot.  Failure to read and follow instructions may 
result in fire, personal injury and/or damage to property if 
Recon Scout Robot or OCU is charged or used improperly. 



To reduce the risk of electric shock, do not remove the shell of the Recon 
Scout robot, Operator Control Unit (OCU) or the chargers. No user-
serviceable parts are inside. Refer servicing to qualified service personnel.  



To reduce the risk of injury or damage, keep these safety precautions in 
mind when setting up, using and maintaining your equipment.  



Read all safety and operating instructions before operating the Recon Scout 
robot.  



Retain the safety and operating instructions for future reference.  



Follow all operating and use instructions.  



Do not attempt to service the Recon Scout robot yourself.  Refer all non-
routine servicing to qualified service personnel.  Repairs or modifications 
not conducted by authorized personnel may result in the voiding of 
warranty and/or Annual Maintenance Plans. 



Keep loose clothing and hair away from the Recon Scout robot. 



Considerations for Charging:  



Always charge with the activation pin inserted in the Recon Scout 
robot and the OCU turned off. 



Always charge in an open, fireproof location. 



Do not leave system unattended while charging. 



Only charge the Recon Scout robot and OCU with chargers provided 
by ReconRobotics. 



Always use a proper country-specific AC wall socket (120-240 VAC). 
Do not force the plug into a socket. 



Ensure connecting pin is not bent when inserting in robot or OCU. 

T a b l e   o f   C o n t e n t s

T a b l e   o f   C o n t e n t s

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F C C   G u i d e l i n e s   a n d   L o g b o o k  

 

  i - i v  

 

R e c o n   S c o u t ®     I n v e n t o r y            

 

        1  

 
R e c o n   S c o u t   R o b o t   C o m p o n e n t s  

        2  

 
I n s t r u c t i o n s   f o r   U s e :    

 

 

 

Q u i c k   S t a r t   G u i d e  

 

 

        3  

 

 

 

R e c o n   S c o u t   R o b o t   a n d   O C U                   4  

 

 

 

C h a r g e r s    

 

 

 

        5  

 

 

F i e l d   M a i n t e n a n c e      

 

        6  

 

F r e q u e n t l y   A s k e d   Q u e s t i o n s  

 

        7  

 

W a t e r - R e s i s t a n t   X T   I n s t r u c t i o n s  

    1 0  

 

S a f e t y   I n f o r m a t i o n   a n d   W a r n i n g s  

    1 1  

 
W a r r a n t y   a n d   S e r v i c e  

     

 

    1 3  

 
 

For applicable FCC guidelines, refer to your FCC logbook 
(U.S. customers only) 

Summary of Contents for XT











Reviews: