background image

©2011 ReconRobotics 

9  

 

 

 

 

The IR light is always turning on even in daylight, is my Recon 
Scout IR/XT/

Rescue 

Robot  broken? 

If there are dust or debris present on the IR blister, the light sensor may determine 
the environment has less ambient light than it really does.  Ensure that the IR blister is 
free of dust or debris by wiping it with a soft towel. 

 

The OCU screen is black, but the Recon Scout robot can still be 
controlled, what is going on? 

If the screen is black, it typically means that the backlight in the LCD screen is 
broken.  This is generally caused by dropping or other action which causes an impact 
to the OCU.  Contact your authorized service station for repair information. 

 

The Recon Scout robot/OCU don’t seem to be holding a charge, 
what can be done? 

First, give them a full charge.  Make sure the Recon Scout robot and OCU are off (pin 
in the robot, switch off on the OCU).  Charge them for a full six hours.  If the lights 
on the OCU start flashing, there may be a problem with the charger or the battery.  
Otherwise, after six hours, perform a runtime test by turning both devices on and 
driving them in place.  If they still do not run as expected (1 hour for robot; 2 hours 
for OCU), contact your authorized service station for repair information. 

 

How do I request service if my Recon Scout is still experiencing 
problems? 

If you’re experiencing problems with your Recon Scout robot and it hasn’t been 
covered by any of the questions in the FAQ, you can request service by contacting 
your ReconRobotics sales representative. 

When you contact, please have the serial number of the product that is experiencing 
difficulties available.  Our technical staff will attempt to evaluate the problem and if 
necessary issue an RMA for repair.  When sending equipment in for RMA, please 
include the entire kit (Recon Scout robot, OCU, and chargers) as some problems may 
manifest in one device when caused by another. 

©2011 ReconRobotics 

2  

 

 

Recon Scout Robot

Recon Scout Robot

 

 

Components

Components

 

 

A Recon Scout robot should have... 

If any of these items are missing, notify ReconRobotics immediately.   

 

 

Throwbot

®

, UVI, IR

 

XT, 

Rescue 

Antennas  

 
 
 
 
 

 

Activation Pin  

 
 
 

 

Wheels (2) 

 
 

 

 

Stabilizer  

 
 
 
 

 

IR Blister 

 
 

     (IR Scout Only) 

 

Summary of Contents for XT











Reviews: