www.reconyx.com
10
HYPERFIRE 2
™
Programming Menu
Your camera includes three main levels of options:
Level 1: Main
menu options
Level 2: Quickset
settings
Level 3: Advanced
settings
The programming menus are set up so that the most commonly used items are
at the top level. Other camera settings that are not as frequently accessed do
not show up every time you are setting up or moving your camera.
NOTE
:
As with the date and time, you can move through and select any of the
menu options by pressing the directional buttons to scroll and the
OK
button when the menu or option you want to select is displayed.
TIP:
Use the “Programming Diagram” on the next page for a better
understanding of how the options are accessed on your HyperFire 2
™
camera.
The backlit LCD includes two lines
of information. The top line
displays the menu, option or
setting you are currently
accessing. After you make a
selection, it may display additional information. The bottom line displays the
available options/settings. Selections you can choose from are always displayed
between < > brackets on the bottom line.
You can change your camera settings any time you like, either prior to using the
camera or in the field. Likewise, you can switch memory cards as needed and
check the remaining space on your memory card as well as your remaining
battery power.
NOTE
:
The camera will remember the settings even when shut off, you do not
need to reconfigure the camera unless you want to change its behavior.
