14
4. Machine Assembly
- cont.
Fig.4.4
TABLE FIXING BOLT & WASHER
TRUNNION
Fig.4.5
TRUNNION
TABLE FIXING BOLT & WASHER
4.2 Rise & fall hand wheel
Attach the rise and fall hand wheel to the rise and fall shaft and tighten
the socket head bolt with a 6 mm allen key. Then attach the handle and
tighten with a 10 mm spanner
(See Fig.4.2).
4.3 Belt tension handle
Attach small crank handle to belt tension and speed mechanism with
10mm spanner (not supplied)
(See Fig.4.3).
4.4 Fitting the table
Tools Required: - 13mm spanner (not supplied)
With the help of another person, lift the working table onto the trunnion.
Mount the working table on the trunnion using the supplied 4 x table
fixing bolts and 4 x washers
(See Fig.4.4 front view & 4.5 rear view).
4.5 Fitting the tension knob
To fit the tension knob, slot it into the key way on the top of the bandsaw.
Fig.4.6
.
Fig.4.3
BELT TENSION & SPEED CHANGE
Fig.4.2
RISE & FALL HAND WHEEL
CRANK
HANDLE
Fig.4.6
Summary of Contents for BS300E Premium
Page 33: ...33 13 Parts Diagrams cont ...
Page 34: ...34 13 Parts Diagrams cont ...
Page 35: ...35 13 Parts Diagrams cont ...
