Record Power BS300E Premium Original Instruction Manual Download

Page: 26 / 41

9. Dust Extraction

The Importance Of Dust Extraction

Before the machine is started, ensure that adequate dust extraction
provisions have been installed. Dust extraction is extremely important not
only for health and safety but also for the correct upkeep of the machine.
Saw dust can cause the machine not to operate properly or even fail
completely. By keeping the machine free of large amounts of waste the
performance will be optimised. If a large amounts of MDF or toxic woods
are to be cut we recommend that there is a good ventilation system in place
and that in addition to proper extraction a mask or respirator be worn as
minimum protection.

Record Power Extractors

Record Power offer a range of high quality dust extractors, we offer both
drum and bag type extractors which filter down 0.5 micron providing
protection from harmful fine dusts. All Record Power dust extractors & chip
collectors have 100 mm inlets and hoses.

DX1000 High Filtration Dust Extractor

Drum type extractor, 45 litre capacity, single 1 kW motor, suitable for
intermittent use ie must be switched off for 20 minutes every hour.

0.5 micron filtration

RSDE1 High Filtration Dust Extractor

Drum type extractor, 45 litre capacity, single 1 kW motor, suitable for
intermittent use ie must be switched off for 20 minutes every hour.

0.5 micron filtration

RSDE2 High Filtration Dust Extractor

Drum type extractor, 50 litre capacity, single 1 kW motor, suitable for
intermittent use ie must be switched off for 20 minutes every hour.

0.5 micron filtration

RSDE/2A High Filtration Dust Extractor
with Auto Switching

Drum type extractor, 50 litre capacity, single 1 kW motor, auto switching
allows the machine to be turned on and off as machines and power tools
are operated. Suitable for intermittent use ie must be switched off for 20
minutes every hour. Maximum auto switch capacity 1.1 kW.

0.5 micron filtration

DX4000 High Filtration Dust Extractor

Drum type extractor, 80 litre capacity, Twin 1 kW motor, suitable for heavy
usage ie if one motor is switched off for 20 minutes then the other can
be used thus enabling continuous usage. Or both motors can be used
simultaneously giving maximum suction but in this mode the extractor must
be switched off for 20 minutes every hour.

0.5 micron filtration

DX5000 High Filtration Dust Extractor

Bag type extractor, 200 litre capacity, Twin 1 kW motor, suitable for heavy
usage ie if one motor is switched off for 20 minutes then the other can
be used thus enabling continuous usage. Or both motors can be used
simultaneously giving maximum suction but in this mode the extractor must
be switched off for 20 minutes every hour.

0.5 micron filtration

CX2600 Chip Collector

Large capacity chip collector, with a powerful 0.37 kW induction motor. An
extremely smooth running unit suitable for continuous usage. Very quiet
impeller system extracts dust and chippings.

Suitable for chip collection or finer dust using the optional filter
cartridge

CX3000 Chip Collector

Larger capacity chip collector, with a more powerful 0.75 kW induction
motor and heavy duty construction. An extremely smooth running unit
suitable for continuous usage. Very quiet impeller system extracts dust and
chippings.

Suitable for chip collection or finer dust using the optional filter
cartridge

Air Cleaners

It is strongly advised to also use an air cleaner to remove the fine airborne
dust present in the workshop which cannot be removed using machine
extraction. Record Power offer a range of air cleaners suitable for all home
workshops. Please contact your preferred stockist or call Customer Services
in your country.

DX1000

RSDE1

RSDE2

RSDE/2A

DX4000

DX5000

CX2600

CX3000

Bandsaws
Circular saws
Sanders

Intermittent usage

Bandsaws
Circular saws
Sanders

Heavy usage