11
8. Assembly
cont.
Fig. 8.9
Fig. 8.11
Fig. 8.13
Fig. 8.10
Fig. 8.12
Fig. 8.14
10. Attach the filter bag support to the motor
housing unit by placing into the hole located as
shown in
Fig 8.9
.
11. Thread one of the tightening bands through
the filter bag as shown in
Fig. 8.10
.
12. Place the filter bag over the upper opening
of the motor housing unit and tighten the band
as shown in
Fig. 8.11
.
13. Attach the plastic collection bag to the
opening on the underside of the motor housing
unit using the remaining tightening band as
shown in
Fig. 8.12
.
14. Place the adjustable hose clip onto the end
of the extraction hose as shown in
Fig. 8.13
.
Place the end of the hose onto the smaller
opening on the underside of the motor housing
unit and tighten until securely fastened using a
slot head screwdriver as shown in
Fig 8.14
.