20
7. Dust Extraction
7.1 The importance of dust extraction
Before the machine is started, ensure that adequate dust extraction
provisions have been installed. Dust extraction is extremely important not
only for health and safety but also for the correct upkeep of the machine.
Saw dust can cause the machine not to operate properly or even fail
completely. By keeping the machine free of large amounts of waste the
performance will be optimised.
If large amounts of MDF or toxic woods are to be cut we recommend that
there is a good ventilation system in place and that a particle mask is worn
as minimum protection.
In addition, it is recommended that air filters are used in all workshops to
ensure collection of potentially harmful airborne particles which are not
collected directly from the machine.
7.2 Record Power Extractors
Record Power offer a range of high quality dust extractors, starting at the
single motor 45 litre RSDE1 right up to the 200 litre twin motor DX5000. We
offer both drum and bag type extractors high filtration models filter down
0.5 micron providing protection from harmful fine dusts such as MDF. Chip
collectors filter down to 5 micron. All Record Power dust extractors & chip
collectors have 100mm inlets and hoses.
RSDE1 High Filtration Dust Extractor
Drum type extractor, 45 litre capacity, single 1 kW motor, suitable for
intermittent use i.e must be switched off for 20 minutes every hour.
0.5 micron filtration; suitable for MDF
RSDE2 High Filtration Dust Extractor
Drum type extractor, 50 litre capacity, single 1 kW motor, suitable for
intermittent use i.e must be switched off for 20 minutes every hour.
0.5 micron filtration; suitable for MDF
Dx1000 High Filtration Dust Extractor
Drum type extractor, 45 litre capacity, single 1 kW motor, suitable for
intermittent use i.e must be switched off for 20 minutes every hour.
0.5 micron filtration; suitable for MDF
Dx4000 High Filtration Dust Extractor
Drum type extractor, 80 litre capacity, twin 1 kW motor, suitable for heavy
usage i.e if one motor is switched off for 20 minutes then the other can
be used thus enabling continuous usage. Or both motors can be used
simultaneously giving maximum suction but in this mode the extractor must
be switched off for 20 minutes every hour.
0.5 micron filtration; suitable for MDF
Dx5000 High Filtration Dust Extractor
Bag type extractor, 200 litre capacity, twin 1 kW motor, suitable for heavy
usage i.e if one motor is switched off for 20 minutes then the other can
be used thus enabling continuous usage. Or both motors can be used
simultaneously giving maximum suction but in this mode the extractor must
be switched off for 20 minutes every hour.
0.5 micron filtration; suitable for MDF
Cx2600 Chip collector
Large capacity chip collector, with a powerful 0.37 kW induction motor.
An extremely smooth running unit suitable for continuous usage. Very quiet
impeller system extracts dust and chippings.
5 micron filtration; unsuitable for MDF
Cx3000 Chip collector
Larger capacity chip collector, with a more powerful 0.75 kW induction
motor and heavy duty construction. An extremely smooth running unit
suitable for continuous usage. Very quiet impeller system extracts dust
and chippings.
5 micron filtration; unsuitable for MDF
AC400 Two Stage Air Filter
Useful for reducing nuisance dust, particularly in smaller workshops. This
unit provides effective two stage filtration for areas up to 113 M
3.
1 micron filtration
AC2 Three Stage Air Filter
This triple stage filter offers highly effective filtering of particles down to 1
micron. Ideal for use in medium to large workshops up to 212 M
3
.
1 micron filtration
RSDE1 RSDE2 Dx1000 Dx4000 Dx5000 Cx2600 Cx3000 AC400 AC2
Bandsaws
Circular saws
Sanders
Intermittent usage
Bandsaws
Circular saws
Sanders
Heavy usage
Planer Thicknessers
Spindle Moulders
Universals
Intermittent usage
Planer Thicknessers
Spindle Moulders
Universals
Heavy usage
Dust Extraction
System
Intermittent usage
General Workshop
Air Filtration
Heavy usage
Recommended
Recommended
Recommended
Recommended
Recommended
Can be used
Can be used
Can be used
Recommended
Recommended
Recommended Recommended Recommended
Recommended Recommended Recommended
Recommended
Recommended Recommended
Summary of Contents for PT107
Page 29: ...29 10 Parts List Diagrams cont ...
Page 33: ...33 ...
