4
Operation
16 / 20
BAL_PROTECT_full_turn_EN_1V0_REC_102-905401101
EV 90° Double Interlocking
EV 120° Double Interlocking
4.2
Customer Instructions for use
The operating procedure is shown below and given the sequence of passage through the full turn in
either direction.
1. The Rotor will normally be locked, unless a free entry/exit option has been specified.
2. Operate the Access Control Device if fitted.
3. On the acceptance of a signal from the Access Control Device the rotor will unlock and be free to
rotate in one direction
4. Pass through the full turn, using your arms to manually push the rotor.
5. The rotor will automatically lock in its new position once the passage has been completed
Important Notices –
– Only one person at a time should pass through the full turn.
– Large packages should be carried in front of you.