Operation
4
BAL_PROTECT_full_turn_EN_1V0_REC_102-905401101
17 / 20
– Should any article become caught in the rotor, STOP, and DO NOT keep forcing through in the
same direction.
4.3
Fail State
The full turn can be set to fail lock (FSL) or fail safe (FSO) in either direction via alteration of the
solenoids and programmable parameters.
The fail state is the same as when a fire alarm signal is received.
4.4
Access Control Devices
can supply the mounting for an Access Control Device, which is specified at the initial order to meet
customer requirements.
4.5
Programmable Parameters
The system operation is conditioned by the values of the 8 trimmers stored in the LL2001 PCB Con-
trol Logic. The system operation is conditioned by the values of the 8 trimmers stored in the LL2001
PCB Control Logic.