2
General information
10 / 34
BAL_DFA_70_EN_1V0_REC_102-127109270
2
General information
2.1
Purpose and use of the instructions
These instructions are an integral part of the system and enable efficient and safe handling of the
system. In order to ensure proper functioning, the instructions must be accessible at all times and
kept in the immediate area of the system.
Although only the male form has been chosen for reasons of better legibility, the information refers to
members of both sexes.
The operator must have read and understood the manual before starting any work. The basic
requirement for safe working is to follow the safety instructions and the handling instructions. In
addition, the local regulations and safety rules apply.
The manual can be handed over in extracts to instructed personnel who are familiar with the
operation of the system.
The illustrations are for basic understanding and may differ from the actual presentation. Specific
representations are contained in the drawings.
2.2
Copyright
The copyright for these instructions remains with:
agtatec ag
The instructions may not be reproduced, distributed, or used for the purpose of competition without
the written consent of agtatec ag.
Infringements shall result in the obligation to pay damages.
2.3
Product identification
For identification, please refer to the nameplate attached to the inside of the casing or to the operator
displaying the following information:
Example:
Type:
Serial number:
Year of construction:
Mains connection:
Power consumption:
Classification according to EN
18650-1:2005:
Marking:
2.4
Manufacturer agtatec ag
agtatec ag
Allmendstrasse 24
CH – 8320 Fehraltorf
Switzerland
Phone:
+41 44 954 91 91
