5
Operation
16 / 26
BAL_Speedgate_slide_EN_1V0_REC_102-905401041
5
Operation
5.1
Passage management
The command logic manages all of the systems actions, which allows a person to move through the
passageway. The logic uses all the information interpreted from the photocells to detect the presence
and position of persons in the inside walkway.
In addition, it receives permissive signals from the readers and at the same time, provides the readers
with activation and transit completed signals. It controls and regulates movement of the mechanisms
and effects all related acoustic and visual warnings.
5.2
Normal Use
When the Speedgate Swing Slim is ready to accept a validation, the PCW lights (item A) are a green
double chevron. The passenger presents his card to the reader, the PCW light in the direction of au-
thorisation will remain the double green chevron, in the opposite direction a red cross will be dis-
played on the PCW.
The Gull Wing DS model has extra LED tracers mounted in the top of the casework. These will pulse
white in card mode , upon receiving a valid signal they will trace green in the direction of transit, see
Fig for a table of events.
5.3
Alarm Conditions
Red cross PCW.
This alarm is activated when:
– The exit side is engaged.
– The gate is out of service.
– Flashing Red Cross PCW.
When the Gate detects an intrusion without authorisation, the lights are flashing red and, after a time
out an audible alarm.
Summary of Contents for Speedgate slide
Page 1: ...record Speedgate slide Translation of the original manual User manual ...
Page 2: ......
Page 25: ......
