8
3
Photo Taking
This option allows you to take still photos using the remote.
A. Take Photos:
1. Power on your WC50 and it will automatically start recording in motion detection mode.
2. Press the motion detection button on the remote to stop motion detection recording, it will enter
the standby mode indicated by a solid GREEN light.
3. While in standby mode, press the photo taking button on the remote to take photos, the light
will flash RED to indicate that a photo was taken and then return to GREEN (standby mode).
Repeat as needed.
NOTE: You can start taking photos from any other recording mode by first stopping that recording
mode and then pressing the photo taking button.
NOTE: You can activate PIR motion detection mode from any other recording mode by first
stopping that mode and then pressing the PIR button.
Stop PRI Motion Detection mode:
1. To stop recording press the PIR motion detection recording button on the remote.
2. The recording will stop, your WC50 will switch to the standby mode, and file will be saved.
MODE BATTERY LIFE: Up to 6 Months.
NOTE: Every recording mode can be played while your WC50 is plugged in.