background image

21

©2007 Recordex USA, Inc.  All rights reserved.

Version: 1.2

User’s Guide

Recordex  TechDisc Pro     CD

®

TM

Image

The Image function,

9. Image,

 allows for loading, editing, renaming, moving and deleting images stored to the internal

hard drive.  This section will review the options available in the Image sub-menu.

9. Image

Figure 5.15

9-08. Image     P:A
Edit

ENT

Disc Info Function

9-01. Image     P:A
Load

ENT

9-02. Image     P:A
Delete Image

ENT

9-03. Image     P:A
Image Info

ENT

9-04. Image     P:A
Compare Image

ENT

9-05. Image     P:A
Select Image

ENT

9-06. Image     P:A
Image Src Drive

ENT

9-07. Image     P:A
ImageFormat Info

ENT

9-01 Image - LOAD
Insert the master disc in the top drive of the duplicator and
press

ENT

 to load the data to the partition selected.  If the

selected partition is empty the load process will start.  If
the partition is not empty you will be asked if you wish to
overwrite the existing data.

Indicates Selected Partition

9-02 Image - DELETE IMAGE
Press

ENT

 to delete the currently selected image.  The sys-

tem will ask you to confirm that you wish to delete the im-
age.  Pressing

ENT

 a second time will clear the partition.

9-03 Image - IMAGE INFO
Press

ENT

 to display information about the selected image.

Use the Up and Down arrow buttons to scroll through the
information available.

9-04 Image - COMPARE IMAGE
Press

ENT

 to compare the contents of the source disc in the

top drive to the contents of the selected image partition.

After  the  compare  process  is  finished  you  may  scroll

through the reported results using the UP and DOWN ar-
row buttons.

* Not available for Audio Disc

9-05 Image - SELECT IMAGE

The hard drive is divided into many partitions.  Press ENT

and then use the arrow buttons to scroll through the parti-
tions.  Press ENT a second time to select the partition you
wish to set as the active partition.

9-06 Image - IMAGE SRC DRIVE

This function allows you to set which disc drive will act as

the source drive for loading images to the hard drive.  The
factory default is to set the top drive

9-07 Image - IMAGE FORMAT INFO

Your hard drive was formatted at the factory for CD or

DVD based on the type of unit you purchased.  Press ENT
to view the Image format (CD or DVD) used.

9-08 Image - EDIT

This  function  allows  you  to  name  the  selected  partition.

Press ENT to activate the title screen and then use the ar-
row buttons to scroll through letters.  Press ENT to select a
letter and then ENT again when you are finished to move to
the next menu title.  You can assign a title and two sub-ti-
tles.

NOTE: Press

ESC

 to move back through the menu. This

is an easy way to get back to the main menu.  Keep
pressing ESC until you are back to 9. Image.

i

Summary of Contents for TechDisc Pro







































Reviews: